SENECA smart weighing solution with ModBUS CANopen interface

SENECA smart weighing solution with ModBUS CANopen interface
Seneca (Italy) – SENECA Z-SG is a strain gauge signal converter.

Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol or the analog output. Sensitivity from 1 to 64mV/V, settable by DIP-switch for integer values, via software for real/integer values. Stable weight indication via Modbus register/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/Modbus register/Modbus commands.

Also available CANopen ZC-SG version.
ZC-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through CANopen protocol. Sensitivity from 1 to 64mV/V, settable by DIP switch for integer values, via software for real/integer values. Stable weight indication via CANopen/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/CANopen.

Source Link

Other Articles from Seneca (Italy)

© Seneca (Italy) / International Weighing Review

For more information about this article from Seneca click here.

Source link

Other articles from Seneca.

© Seneca / International Weighing Review

Share this Article!

Interested? Submit your enquiry here:

KSE receives order to improve bulk outloading at Aveve Veevoeding Aalter (Belgium)

Market Drives Grundon’s New Bin Weighing Fleet