Weight Meter SWI-94 from Simex

Weight Meter SWI-94 from Simex
Simex Sp. z o.o. (Poland) - Simex is introducing their new weight meter SWI-94, which is designed to work with load cells (strain gages) in applications not required to be approved.

Specifications:
The device is equipped with push-buttons which allow easy setting of tare and zero and also switching between net and gross indications. Build in analogue output and RS-485 interface enable remote control of the device by a host system if required. 2 relay outputs allow to use the SWI-94 as controller for simple systems with batching function.

Calibration methods:
The Weight meter SWI-94 software enables the use of two calibration methods: data sheet calibration, or dead weight calibration. All critical states of the device are signalized by proper error messages. The measured weight is displayed on 6-digit, readable LED display.

For more information about this article from Simex Sp. z o.o. click here.

Source link

Other articles from Simex Sp. z o.o..

© Simex Sp. z o.o. / International Weighing Review

Share this Article!

Interested? Submit your enquiry here:

Kit from Transcell promises simple way to Bluetooth-enable scales

Avery Weigh-Tronix gives Ragus a sweet deal on new weighbridge